Shubham’s Package Sewage treatment Plant is totally self-contained, covered, single piece packaged treatment system for onsite wastewater treatment. Package STP’s are innovative and truly versatile systems for the effective treatment of wastewater, including Nutrient removal. They can be configured for BOD reduction, suspended solids reduction, Ammoniacal and/or total Nitrogen reduction and Phosphorus reduction. Membrane Bio Reactor (MBR) ‘s features have been built into the Single Packaged Plant to create the physical-biological tertiary treatment with water recycling.
The Membrane Bio Reactor (MBR) is a biological system coupled with a membrane to enhance solid-liquid separation and filtration. The membrane is made of cost-effective non-woven fibrous material. It has many outstanding properties, such as controllable pore sizes and easy fabrication of the membrane module to achieve the desired surface area. The MBR can achieve desired permeation rate at low trans membrane pressure.
Features & Benefits:
Membrane Bioreactors (MBR) are based on the combination of biological treatment and a membrane filtration unit. The sludge retention in a compact system such as the MBR is independent of the sludge characteristics. In this system sludge and water is separated through membrane filtration. This makes the system very robust and flexible. The membranes are concatenated in the form of modules:sets of tubes, hollow fibers or plates.
The MBR package plant is a fully self contained MBR wastewater treatment system incorporating the following process stages:
1. Inlet screening
2. Primary / Anoxic tank - Denitrification
3. Aeration / Membrane Bioreactor tank -Nitrification
4. membrane filtration modules5. Permeate receiving and disinfection
The fully pre-assembled and factory tested MBR –[ External ]plant
Primary and bioreactor tanks are open topped with safety railings around access points. Permeate pumps, aeration blower, dosing systems, monitoring and control systems are housed in a lockable control room located at the front of the plant.
The pre-programmed PLC system includes full process monitoring and data logging functions.
Full telemetry including remote control is available as an option. The MBR- External is designed to require minimal operator supervision making it ideal for installation in remote locations.
Also treatment possible with high salt concentrations, thermopile applications, difficult degradable components, lots of chemicals.
High removal percentage of COD, BOD5, Total N. TSS < 30 mg/l
Capacity Range: 10 – 500 KL per day
Features & Benefits For MBR
Leading Edge package sewage treatment plant
Incorporate advance membrane technology.
Idea for sites where water reuse is premium.
Advanced environmental protection equipment to achieve quality discharge.
High removal efficiency for nitrogen, BOD & COD,
Fewer process to achieve comparable effluent quality.
Eliminate Sludge ability Issues.
Small Foot Prints.
Reduce sludge yield
High Quality Effluent
Plan capacity is Expandable with addition of MBR Modules.§ High Resistance to Hydraulics and shock load.
Clean in Place§ Effluent Quality BOD < 3 TSS < 1 Turbidity < 1
Available in Concert and steel tanks.
|Automatic Grade||Semi-Automatic, Manual, Automatic|